Προσοχή! Τα cookies χρησιμοποιούνται σε αυτόν τον ιστότοπο για να παρέχουν την καλύτερη εμπειρία χρήστη. Αν συνεχίσετε, υποθέτουμε ότι συμφωνείτε να λαμβάνετε cookies από αυτόν τον ιστότοπο. OK
0 Your Cart

Δωρεάν μεταφορικά για λίγες μέρες με αγορές πάνω από 100€ και βάρος έως 3 κιλά!

Noctua NH-D15S Processor Cooler(NH-D15S)

Κάντε κλικ πάνω από μια εικόνα για μεγέθυνση

Τιμή Τιμοκαταλόγου: 89.00
71.10
Κερδίζετε: 17.90
Σε απόθεμα
+
MUB126372
Μεταφορά
Πληρωμή
Γιατί να επιλέξετε εμάς

Περιγραφή

Tailored to provide superior RAM and PCIe compatibility, the NH-D15S is an asymmetrical single fan version of Noctua’s award-winning flagship model, the NH-D15. Thanks to its asymmetrical design, the NH-D15S clears the top PCIe slot on most µATX and ATX motherboards. At the same time, the single fan setup and recessed lower fins guarantee 100% RAM compatibility with memory modules of up to 65mm height. Users who have sufficient room can also upgrade the cooler with either a 120mm or round 140mm fan on the front fin stack for further improved performance in dual fan mode. Topped off with the trusted, pro-grade SecuFirm2™ multi-socket mounting system, Noctua’s proven NT-H1 thermal compound and full 6 years manufacturer’s warranty, the NH-D15S forms a complete premium quality solution that combines dual tower efficiency with excellent compatibility and flexible upgrade options.\n\nHigh-compatibility version of NH-D15\nCompared to the award-winning NH-D15, the S-version uses an off-set, asymmetrical layout and a single instead of dual NF-A15 fans. This allows the NH-D15S to provide state-of-the-art heatsink performance while maintaining superior RAM and PCIe compatibility.\n\nExcellent RAM compatibility\nThanks to its recessed lower fins, the NH-D15S provides 65mm clearance for tall memory heatsinks, making it compatible with most high end modules on the market. As the lower fins are recessed on both sides of the heatsink, compatibility is excellent not only on LGA115x and AMD, but also on LGA2011 where there are RAM slots on both sides of the socket.\n\nAsymmetrical layout for better PCIe compatibility\nAs many current motherboards have the top PCIe x16 slot sitting close to the socket, bigger heatsinks tend to block it. Due to its asymmetrical layout, the fin-stack of the NH-D15S is off-set towards the upper edge of the motherboard when installed in standard orientation. This allows it to clear the top PCIe x16 slot on most current µATX and ATX motherboard.\n\nNF-A15 140mm fan\nComplying with Noctua’s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.\n\nDual-fan ready\nUsing the supplied extra fan clips, the NH-D15S can be upgraded with either a second round-frame 140mm fan with 120mm mounting holes (such as the NF-A15) for maximum performance or a common 120mm fan (such as the NF-F12) for improving performance while maintaining compatibility with RAM modules of up to 45mm height.\n\nPWM support and Low-Noise Adaptor\nThe NF-A15 premium fan supplied with the NH-D15S supports PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied Low-Noise Adaptor for even quieter operation.\n\nExcellent component cooling\nExtending below the fin-stacks, the large NF-A15 fan not only contributes to the superb CPU cooling capabilities of the NH-D15S but also provides massive airflow over surrounding motherboard components and heatsinks, thus ensuring excellent component cooling performance.\n\nSecuFirm2™ mounting system\nNoctua’s SecuFirm2™ mounting systems have become synonymous with quality, safety and ease of use. Supporting Intel LGA115x (LGA1150, LGA1151, LGA1155, LGA1156), LGA2011 (LGA2011-0 & LGA2011-3) and AMD (AM3(+), AM2(+), FM1, FM2(+)), the SecuFirm2™ mounting included with the NH-D15S guarantees perfect contact pressure and maximum convenience on all current sockets.\n\nCompatibility with past and future sockets\nComplying with the open SecuFirm™ standard, the NH-D15S can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit, which is provided by Noctua free of charge. If technically possible, Noctua will also provide upgrade kits for future sockets.\n\nNT-H1 thermal compound\nHaving received more than 100 awards and recommendations from hardware journalists around the world, Noctua’s NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability.\n\n6 years warranty\nNoctua products are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the supplied NF-A15 features an MTBF rating of more than 150.000 hours and the entire NH-D15S package comes with a full 6 years manufacturer’s warranty.

Χαρακτηριστικά

Manufacturer / Brands:
Noctua
Colour of product:
  • Copper, Metallic
Material:
  • Aluminium, Copper
Type:
  • Cooler

Performance

Airflow:
  • 140.2 m³/h
Compatible processor series:
  • Intel® Core™ i3, Intel Core i5, Intel Core i7
Fan diameter:
  • 14 cm
Maximum air pressure:
  • 2.08 mmH2O
Mean time between failures (MTBF):
  • 150000 h
Noise level (high speed):
  • 24.6 dB
Rotational speed (max):
  • 1500 RPM
Rotational speed (min):
  • 300 RPM
Suitable for:
  • Processor
Supported processor sockets:
  • Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+, LGA 2011-v3 (Socket R)

Power

Power consumption (typical):
  • 1.56 W
Voltage:
  • 12

Processor

Thermal Design Power (TDP):
  • 220 W

Weight & dimensions

Depth:
  • 190 mm
Height:
  • 165 mm
Package depth:
  • 225 mm
Package height:
  • 235 mm
Package weight:
  • 1.98 kg
Package width:
  • 190 mm
Weight:
  • 1.15 kg
Width:
  • 150 mm

Αξιολογήσεις

Μέχρι την Κυριακή 2% έκπτωση
Για την λήξη της προσφοράς απομένουν:
ΠΑΡΟΜΟΙΑ ΠΡΟΪΟΝΤΑ